Production guide

How to handle last-minute speaker presentation changes

A revised deck arrives just before rehearsal. Give the change one owner, confirm which file is approved, update the affected cues and have the operator test the replacement on the show machine.

Receive the change in one place

Route late files to one producer or content lead. Ask colleagues to forward the original message and attachment to that person, so the operator receives a single, deliberate handover.

Record the speaker, session, affected cue, arrival time and what changed. Ask whether slides were added, deleted or reordered, whether media changed, and whether the speaker needs extra time. A small edit can affect a lower third, the closing cue or the next speaker's entrance.

Keep a short intake record in your crew's shared document or spreadsheet. The approval and handover fields here are records for your team to maintain.

  • Show, room, session and cue ID.
  • Current approved filename and proposed replacement filename.
  • Summary of the change and the person requesting it.
  • Content approver and production owner.
  • Decision deadline, operator receipt and test result.

Confirm what is approved

Have the responsible content owner identify the exact file they approve. Then have the producer or show caller decide whether the change can be accommodated within the remaining preparation time. Keep those decisions visible in the record.

A filename containing final or NEW carries no approval evidence by itself. Read back the exact filename and version when a decision arrives by phone or radio, then record who made the decision and when.

Agree the fallback before the deadline. If the replacement remains unapproved or untested, the show caller needs an explicit decision about retaining the previously approved deck, changing the cue or holding the session. Preserve the earlier approved package until the replacement is accepted.

Update the package and cues

Put the approved replacement in the working package. Keep the superseded version in a clearly separate archive so the operator can identify the current files. Preserve a record of the previous version for recovery.

Update the media reference in every affected run-of-show row to the exact replacement filename, including its extension. Check reused decks, holding slides and later return appearances. Keep the cue ID stable so printed notes and crew conversations still refer to the same moment.

If the change alters timing, agree the duration with the speaker and show caller, then review the following cues. Record the new run-of-show revision and tell the people affected. Use the run of show template if you need a consistent place to record filenames and instructions.

Test the replacement on the show machine

Open the approved file on the presentation computer. Review the complete deck, paying particular attention to the edited sections and their transitions. Check slide layout, fonts, builds, presenter notes, embedded or linked media, audio and the final slide. Recheck any separate video files the change introduces.

Microsoft documents that linked media and media compatibility can need attention when moving a presentation between devices. Follow the relevant PowerPoint media troubleshooting guidance, then test the actual presentation and audio path used for the show.

If a backup machine is part of the agreed setup, transfer the same approved package and check it there too. Confirm the start state with the operator, including the first slide, audio cue and any hold instruction.

Recheck the changed files in ShowReady

  1. Open the show's Run of show tab. Add the revised file using Choose files or Choose folder. You can also use Add a ZIP for a package. Adding files keeps your existing cues.
  2. If a file at the same path has different contents, review the replacement prompt. When a filename changes, update the affected cue references and check which file each cue uses.
  3. Run a fresh preflight check and review its current findings. Replacing a source file makes the earlier check out of date.

Use Replace everything… only when you intend to clear the current schedule and start over. Keep earlier approved versions in your own archive. ShowReady reads source files in your browser and saves the schedule and check report to your show. After a refresh or later visit, reattach the source files before running another check.

The run-of-show and media check can surface missing or ambiguous cue-to-file matches and supported structure or metadata findings. A file selection in ShowReady records which asset a cue uses. The content owner still approves the material, and the crew verifies complete playback on the actual show setup, including installed fonts, slide appearance and audio.

Worked change register

This fictional crew-maintained register follows cue S07 in a conference. The current deck is Keynote_v03.pptx. At 09:10, the speaker supplies Keynote_v04.pptx for a 09:30 session. The times illustrate a sequence; the review needs enough time for the actual deck and media.

Fictional change record for conference cue S07
TimeDecision or actionOwnerEvidence
09:10Log replacement and two revised slidesContent leadKeynote_v04.pptx received
09:12Approve content and unchanged 25-minute slotSpeaker and producerExact filename and duration confirmed
09:14Update S07 media reference and ROS revisionProducerRun of show revision 06
09:18Review deck and test media on show setupPresentation operatorReceipt and test result recorded
09:20Confirm current file and standby instructionShow callerS07 handover closed

If the 09:18 test finds a problem, keep the item open and escalate it to the producer. Record the agreed fallback and brief the operator before calling the cue. Receiving the file is only the first step in closing the change.

Close the handover with the people running the room

Send one concise update naming the cue, approved file, schedule revision and changed instruction. Ask the operator to confirm receipt. Include the stage manager, show caller and any other department whose cue changes. Use the speaker media handover checklist to keep the record together.

Use the actual result in the status field, such as “received, awaiting approval”, “approved, awaiting test” or “tested, operator briefed”. Keep any remaining condition explicit.

Before calling the cue

  • The content owner approved the exact replacement file.
  • The producer accepted the timing and any operational changes.
  • The run of show points to the correct filename and revision.
  • The operator received and tested the approved package.
  • The show caller knows the current instruction and agreed fallback.

Check the revised show package

Create a free account, confirm your email and create a show. Add your schedule and media, confirm how the schedule was read and run the preflight check. Use the rehearsal checklist for checks with the crew and actual show system.

Create free account